Winged scalloped tail outline – full shape with release at rail wings
- Allows rider to shorten the arc of his turn off the wing for slaying

Molded in Warped long base side fins
- Smooth water flow, superior hold, minimum drag

Shallow canted inside fins placed at edge of center tip concave
- Acts as extension of concave to maximize the thrust through center

Low volume rails with thinned out tip section
- Faster on edge with more hold
- Low swing weight and tip flex

Lifted Variable edge rails
- Slight bevel, rounded to sharp through length of rail

Aggressive, 3-stage Rocker
Gives the rider the highest trajectory arc off the wake for a straight-up pop. Coupled with the deep single concave between the center set of fins, the new Shane has unmatched ollie power

Shallow Scalloped Tail
- Full tip area working with the large concave exiting through the center

Rating

Double to Triple Concave Hull
D-I-S-C hull through center, deepens underfoot, into triple out the tail
- DISC for softening impact and maintaining speed
- Deep double for precise sweet spot lift under your feet
- Triple concave with BIG center single for ollie power and pop

Winged scalloped tail outline – full shape with release at rail wings
- Allows rider to shorten the arc of his turn off the wing for slaying

Molded in Warped long base side fins
- Smooth water flow, superior hold, minimum drag

Shallow canted inside fins placed at edge of center tip concave
- Acts as extension of concave to maximize the thrust through center

Low volume rails with thinned out tip section
- Faster on edge with more hold
- Low swing weight and tip flex

Lifted Variable edge rails
- Slight bevel, rounded to sharp through length of rail

Aggressive, 3-stage Rocker
Gives the rider the highest trajectory arc off the wake for a straight-up pop. Coupled with the deep single concave between the center set of fins, the new Shane has unmatched ollie power

Shallow Scalloped Tail
- Full tip area working with the large concave exiting through the center

Rating

SHANE 138

Super Flex construction
- Allows rider to press on rails, and spring off the water

ABS Sidewall Construction
- Added durability and strength

Single Concave Hull
- Smooth flow through water, catch-free on rails

Mike Ennen original artwork on each model
- A rider who does more than rip

Rating

What happens when you take our top pro model shapes and make them 5.9 lbs each? You get the most advanced and aggressive wake riding beasts available! Whether you want the all around smooth feel of a Watson, the fast and explosive feel of a Lyman, the playful yet aggressive feel of a Shane, or the aggressive yet forgiving feel of Phillip’s all new S4, the F.L.Y. Series is guaranteed to take your riding to levels never experienced!

Precision CNC milled PVC cores
- Compressive strength without the dead weight in the center
- A new construction process to yield the lightest Liquid Force boards EVER!

Internal multi-layered stringer system
- Superior strength with a lively spring

Translucent graphic substrate material
- Provides a window into the tech while reducing weight

Available on 8 Liquid Force PRO models
- Freedom of choice in our highest offering

F.L.Y. Series 2 pack inserts
- Less Material equals less weight!
- Stance options are the “Sweet Spot” stance options preferred by the pro whose name is on the board

Rating

• Overall :
• Pop :
• Tracking :
• Weight :
• Spin :
• Landings :

Information:
Whether he’s talking about the state of the industry, landing new tricks like Toe-side Backside 7’s, or helping us design better products, Shane is always running at full speed. When he created his latest pro-model board, he told us, “…make it as aggressive as you can, but keep it real. I want it to roll onto an edge super smooth and faster than anything else out there. I want it to take off like a rocket and explode off the wake but not buck me weird. Oh yeah… of course I want it to land super soft…Is that too much to ask?” Apparently not, because what was created was an exciting board that still allows the rider to remain cool, calm and collected. Shane’s modern design generates persistent speed all day long and most importantly, smooth landings that help absorb those big landings from double-ups. Only a pro model of this caliber and style can receive the official Shane Bonifay seal of approval.

Features:
Aggressive, 3-Stage Rocker
-This edgy and fierce style is a force to be reckoned with. There is no mistake that this rocker will give you the boot you’re looking for.

Center “V” w/Double Concave Mid-Section that Feeds into Triple Concave Tail
-Breaks water for soft landings. Aggressively channels water and generates speed.

Warped Molded in “C-4” Fin Setup
-Four canted fins angled for effectiveness and placed for precision. Warped molded inside fins focus lift through center tip concave. Outside cupped fins provide insane hold with minimal drag. Fast, loose, and have the holding power to carve like mad.

Lifted Variable Edge
- Lifted and soft in the middle – Forgiving when neutral, spins faster off the wake, lands still spinning – Sharpens as it nears the tail – Locks and holds edge into the water when weight is transferred into the edging position – Clean and catch free sliding.

Performance “Full” Shape
-Down Size 2-3cm -1/2in wider; can be ridden 2-3cm shorter. Increased surface area focused in the middle of the board for unparalleled pop, minimal swing weight, easy to maneuver.

Rating

• Overall :
• Pop :
• Tracking :
• Weight :
• Spin :
• Landings :

Information:
Shane always takes pride in pushing the limits. Whether he’s talking about the state of the industry or helping us design better products, he’s always running at full speed. When he created his latest pro-model board, he told Jimmy, “…make it as aggressive as you can, but keep it real. I want it to roll onto an edge super smooth and faster than anything else out there. I want it to take off like a rocket and explode off the wake but not buck me weird. Oh yeah… of course I want it to land super soft…Is that too much to ask?” Apparently not, because what was created was an exciting board that still allows the rider to remain cool, calm and collected. Shane and our creative shaping minds designed a board with a double concave mid section that feeds into a triple concave tail. This generates persistent speed and most importantly, smooth landings that help absorb those big landings from double-ups. Only a pro model of this caliber and style can receive the official Shane Bonifay seal of approval.

Specifications:

• Hard Rocker-This edgy and fierce style is a force to be reckoned with. There is no mistake that this rocker will give you the boot you’re looking for. Don’t let your parents know you follow this reckless lifestyle.
• Center “V” w/Double Concave Mid Section that Feeds into Triple Concave Tail-Breaks water for soft landings. Hungry to channel water and generate speed.
• Warped Molded in “C-4” Fin Setup-Four canted fins angled for effectiveness and placed for precision. Warped molded inside fins focus lift through center tip concave. Outside cupped fins provide insane hold with minimal drag. Fast, loose, and have the holding power to carve like mad.
• Lifted Variable Edge-There’s no catch – Lifted and soft in the middle – Forgiving when neutral, spins faster off the wake, lands still spinning – Sharpens as it nears the tail – Locks and holds edge into the water when weight is transferred into the edging position – Clean and catch free sliding.
• Performance “Full” Shape – Down Size 2-3cm-1/2in wider; can be ridden 2-3cm shorter. Increased surface area focused in the middle of the board for unparalleled pop, minimal swing weight, easy to maneuver.

Rating

• Overall :
• Pop :
• Tracking :
• Weight :
• Spin :
• Landings :